Electrical and Electronic Tests Standards

Our company professionally performs the testing, inspection and certification of all standards in the field of electrical measurements.

TS EN 61028 Electrical measuring instruments-XY recorders

TS EN 61083-1 Digital recorders used for measurement in high voltage impulse tests section 1; Features for digital recorders

TS EN 61143-1 Electrical measuring instruments-XY recorders-Section 1: Recipes and features

TS EN 61143-2 Electrical measuring instruments-XT Recorders section 2: Recommended additional test methods

TS EN 61187 Documentation of electrical and electronic measuring instruments

Test instruments used to verify the protection provided by TS EN 61032

TS EN 60064 / A3 Lamps - Tungsten filament - Used for general lighting purposes in home and other places - Performance characteristics

TS EN 61010-1 Safety rules for measurement, control and electrical equipment used in the laboratory - Part 1: General rules

TS EN 60060-1 High voltage test techniques - Part 1: General description and test rules

TS EN 60060-2 High voltage test techniques - Part 2: Measuring systems

61010-1: 2010 Safety features for measuring, control and electrical devices used in the laboratory

TS EN 62475 High current test techniques - Measurement systems with recipes and rules for test currents

Safety regulations of electrical equipment used in measurement, control and laboratory - Part 61010-2: Particular requirements for X-Ray cabinets

Safety regulations of electrical equipment used in measurement, control and laboratory operations - Part 61010-2: Particular requirements for hand-operated and hand-operated current tongs used in electrical tests and measurements

Safety regulations for electrical devices related to measuring and laboratory use - Part 61010-2: Handheld multimeters and other devices, for measuring internal and external use

Safety regulations of the electrical equipment used in the measurement, control and laboratory laboratories - Part 61010-2: Particular requirements for X-ray cabinets

TS EN 61326-1 Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 1: General requirements

Electrical equipment for measuring, control and laboratory use - Emu requirements - Part 61326-2: Special requirements - Performance criteria, test configurations and operating conditions for integrated or remote signal conditioning transducers

TS EN 61326-2-4 Electrical equipment for measurement, control and laboratory use - Emu requirements - Part 2-4: Special requirements - Iec for insulation fault location according to 61557-9 and device for insulation monitoring device according to 61557-8 Experiment configuration, working conditions and performance criteria

X NUMX: Evaluation of the software used for the determination of the impulse waveforms

Safety rules - For electrical equipment used in measuring, control and laboratories - Part 61010-2: Particular requirements for centrifuges used in the laboratory

Safety regulations of electrical equipment used in measurement, control and laboratory operations - Part 61010-2: Particular requirements for laboratory equipment for the heating of materials

TS EN 61207-6 Gas analysis performance Statement - Part 6: Photometric analysis

Safety rules - For electrical equipment used in measurement, control and laboratory - Part 61010-2: Particular requirements for fully automated and semi-automated laboratory equipment for analysis and other purposes

Safety regulations of the electrical equipment used in the measurement, control and laboratory processes - Part 61010-2: Particular requirements for laboratory equipment for mixing and rinsing

Safety regulations of the electrical equipment used in the laboratory for measuring, checking and laboratory operations - Part 61010-2: Particular requirements for thermal atomisers and ionisation atomic spectrometers used in the laboratory

Safety regulations for electrical equipment used in measurement, control and laboratory operations - chapter 61010: Safety rules for hand-held probe assembly used in electrical measurements and tests

TS EN 61187 / AC Electrical and electronic measuring device - Documentation

TS EN 60270 / A1 Cables - High voltage test techniques - Partial discharge measurements

TS 2051 EN 60270 Cables - High voltage test techniques - Partial discharge measurements

TS EN 61010-2-040 Safety regulations of measuring, control and electrical devices used in the laboratory

TS EN 62052-31 Electrical measuring equipment (aa) - General rules, tests and test conditions - Part 31: Product safety guidelines and tests

TS EN 61180 High voltage test techniques for low voltage devices - Definitions, test and processing rules, test equipment

TS EN 61010-2-012 Safety requirements for electrical equipment used in measurement, control and laboratory - Part 2-012: Particular requirements for climatic and environmental testing and other temperature conditioning equipment

Safety regulations of electrical equipment used in measurement, control and laboratory - Part 61010-2: Particular requirements for in vitro diagnostic equipment

TSE CEN / TS 16637-2 Construction products - Assessment of hazardous substance release - Part 2: Horizontal dynamic surface extraction test

TS EN 60068-1 Environmental resistance tests - Part 1: General and guidance (IEC 60068-1: 2013)

TS EN 60068-2-75 Environmental resistance tests - Section 2-75: Tests - Testing Well: Hammer tests

Environmental resistance tests - Section 60068-2: Tests - Test Ff: Vibration - Time history and sine pulse method (IEC 57-2-57: 60068)

TSE CEN / TS 16637-1 Construction products - Assessment of hazardous substance release - Part 1: Guidance for surface extraction tests and determination of additional test steps

TSE CEN / TS 16637-2 Construction products - Evaluation of the release of hazardous substances - Part 2: Horizontal dynamic surface extraction test

TS EN 61347-2-10-1-2 / tst A10 Lamp controller - Section XNUMX-XNUMX: Electronic converters and converters for high frequency operation of cold start tubular discharged lamps

Safety rules - Part for electrical appliances used in household and similar areas 60335: Particular requirements for motor compressors

Signaling in the low-voltage electrical installation in the frequency range 50065-4-7-3 / tst AC 148,5 khz - 1,6 khz and 30 MHz - Section 4-7: Portable low voltage decoupling filters - Safety rules

ISO / IEC 7816-6 ID cards - Integrated circuit boards - Section 6: Inter-industry data elements for change

tst ISO / IEC 7816-8 ID cards - Integrated circuit boards - Part 8: Safety-related commands

tst ISO / IEC 8824-1 Information technology - Abstract word index notation 1 (asn.1): Basic notation feature

tst ISO 14229-1 Road vehicles - Combined diagnostic services (uds) - Part 1: Specification and rules

tst ISO 14230-2 Road vehicles- Diagnostic systems - Keyword protocol 2000 - Section 2: Data contact layer

Environmental resistance test - Section 60068-2: Tests - Tests and guideline: Combination of low air pressure and temperature or humidity and humidity tests

TS EN 60068-3-13 Environmental resistance tests - Section 3-13: Supplementary documentation and guidance for the T-Test - Soldering

TS EN 61207-7 / AC Performance statement of gas analyzers - Part 7: Tunable semiconductor laser gas analyzers

TS 2093 EN 60068-2-11 Environmental resistance tests - Section 2-11: Tests - Test k: Salty fog

TS 2094 EN 60068-2-13 Environmental resistance tests - Section 2-13: Tests - Test: Low air pressure

TS 2096 EN 60068-2-17 Environmental resistance tests - Part 2-17: Tests - Test q sealing

Environmental testing - Section 60068-2: Tests - test db: wet temperature, cyclic (30 clock + 2 clock cycle)

3185 60068 3 4 3-4 XNUMX XNUMX XNUMX-XNUMX XNUMX-XNUMX

5575-60068 2 45 2 45 XNUMX XNUMX XNUMX XNUMX XNUMX XNUMX XNUMX-XNUMX XNUMX-XNUMX

6326-60068: Experiments-Experiment z / afc: Combined cold / vibration (sinusoidal) test which can be applied to both heat dissipating and non-heat-emitting samples

Combined dry temperature / vibration (sinusoidal) test which can be applied to both heat dissipation and non-heat dissipating samples. 6327-60068-2-51

6328-60068-2 Environmental resistance tests - Section 52-2: Tests- Experiment kb: Salted fog cycle (sodium chloride solution)

6329-60068 - 2-41 - 2-41: Experiments - Test z / bm: Combined temperature / low air pressure test

6986-60068 2-48 2-48: Tests - Guidelines for the application of experiments simulating storage labels in the Iec 60068 standard series

TS 6988 EN 60068-3-2Environmental resistance tests - Part 3: Basic information - Part 2: Combined temperature / low air pressure tests

Classification of environmental conditions - Part 8756: Environmental parameters and their severity

Tst EN 13146-6 Railway applications - Test methods for road - linkage systems - Part 6: Effect of severe environmental conditions

60068-2 - 9-2 - Tests for solar radiation test

TS EN 60068-2-38 Environmental resistance tests - Section 2-38: Tests - Test z / ad combined temperature / humidity cycle test

TS IEC 60068-2-49 Basic test methods for environmental resistance - part 2: Tests - Guide for test kc: sulfur dioxide test for contacts and connections

TS EN 60068-2-68 Environmental resistance tests - Part 2: Tests - Test l: Dust and sand

Environmental testing - Section 60068-3: Support documentation and manual; Choose between vibration tests

TS EN 60068-2-1 Environmental resistance tests - part 2-1: Tests - Test a: Cold

60068-2 Environmental testing - Part 67-2: Tests - Experiment cy: Accelerated experiment for components with age, steady state

60068-2-70 Tests for resistance to environmental conditions - Section 2: Tests-Experiment xb: Distortion of marking and lettering with the friction of fingers and hands

TS EN 60068-2-74 Environmental resistance test procedures - Part 2: Tests - Test xc: Liquid contamination (iec 60068-2-74: 1999)

TS EN 60068-2-77 Tests for environmental conditions - Section 2-77: Test - Test 77: Tapping, mechanical impact and body durability

60068: Seismic test methods for guiding devices

TS EN 60068-4 Environmental resistance test procedures - Part 4: Information for specification makers

TS EN 60068-5-2 Environmental resistance test procedures - Part 5: Guidelines for the preparation of test methods - Terms and definitions

Environmental testing - Section 60068-2: Experiments - Experiment u: The robustness of termination and integrated mounting elements

Environmental resistance test - Section 60068-2: Tests - Kd test: Hydrogen sulfide test for contacts and connections

TS EN 60068-2-47 Environmental resistance tests - Section 2-47: Tests - Mounting of samples for dynamic tests such as vibration, impact and similar

60068-2: Tests and guidance: Combined climate (temperature / humidity) and dynamic (vibration / shock) tests

Test of environment - Part 60068-2: Tests - Experiment: Solderability test of electronic elements by means of wet balance method

TS EN 60068-2-64 Environmental resistance tests - Part 2-64: Tests - Test fh: Vibration, wide band indiscriminate and guide

The test of the solderability of electronic components for surface-mounted elements (smd) by means of the soaking equilibrium method - TS EN 60068-2-69

TS EN 60068-2-80 Environmental resistance test - Section 2-80: Fi test: Vibration - Hybrid mode

Environmental testing - Part 60068-2: Tests - Tests: Electrical shock; Synthesis of electric shock spectrum

Environmental testing - Section 60068-2-Tests - Tx test: whisker test methods for electrical and electronic components

60068-3 Environmental testing - Section 11-3 - Support documentation and guidance - Calculation of measurement uncertainty of the conditions in climate testing chambers

Environmental testing - Section 60068-3: Supplementary documentation and instructions - Verification of the performance of temperature test chambers

60068-3 6-3: Supplementary documentation and guidance - Verification of the performance of temperature / humidity test rooms

60068-3 - 7-3: Auxiliary documentation and guidance - Measurements in temperature test rooms for test a and test b (loaded)