Turkey's leading testing, inspection companies to you as unique accuracy, highly experienced specialists, all of the tests below standard with advanced inspection methods, we provide audit and certification.
TS EN 60603-10 (Formerly: TS IEC 603-10) Connectors-Section used in printed circuit boards at frequencies below 3 mhz 10: Two-piece connectors used in 2,54 mm basic grid printed circuit boards reverse type
TS EN 60603-9 (Formerly: TS IEC 603-9) Connectors-3 two-piece connectors, back panels and cable connectors for frequencies below MHz, used in printed circuit boards
TS EN 60603-12 (Formerly: TS IEC 603-12) Connectors-Section used in printed circuit boards at frequencies below 3 mhz 12: Dimension, general specifications and detailed specifications for the group of female connectors designed for use in integrated circuits
TS EN 60603-13 (Formerly no: TS IEC 603-13) Connectors-For frequencies below 3 MHz, the group 13: used for printed circuit boards with a base grid of 2,54 mm cannot be accessed with a group of evaluated two-piece connectors of rated quality. detail specification for free connectors with insulating stripper terminals (ys)
TS EN 61319-1 + A11 Interconnection of satellite receivers - Part 1: Europe
TS EN 61076-4 Qualified connectors for direct current (da), low frequency analog and digital high speed data applications - Part 4: Partial specifications - Printed circuit connectors
TS EN 60512-16-20 Electromechanical components of electronic devices - Basic test procedures and measuring methods - Part 16: Mechanical tests to be applied to contacts with terminals - Part 20: Test 16t: Mechanical durability ((wired terminals of solderless connections)
TS EN 60512-23-3 Electromechanical components for electronic devices - Basic test procedures and measuring methods - Part 23-3: Test 23c: Screening efficiency of connectors and accessories
TS EN 61076-7 Connectors - Used in low frequency analog and digital high speed data applications - Part 7: Quality approved non-cable installations - Includes quality and capability approval - Part specifications
TS EN 60512-6-4 Connectors for electronic devices-Tests and measurements-Section 6-4: Dynamic stress tests-Test 6d: Vibration (sinusoidal)
TS EN 60512-11-12 Connectors for electronic devices - Tests and measurements - Part 11-12. air conditioning experiments; Experiment 11m; Age, temperature, cyclic
TS EN 60512-11-2 Connectors for electronic devices-Tests and measurements-Section 11-2: Air conditioning tests-Test 11b: Combined consecutive cold, low air pressure and wet temperature test
TS EN 61076-2-102 Connectors for electronic devices - Part 2-102: Circular connectors with quality evaluation; Detail feature of plugs and jacks for external low fall supply
TS EN 61076-4-100 Connectors for electronic devices - Part 4-100 quality rated printed circuit connectors - Test specification for two-section connector modules with 2,5 mm grid for printed circuits and back sides
TS EN 61076-4-101 Connectors for electronic devices - Part 4-101 quality rated printed circuit connectors-Iec Detail specification for two-section connector modules with 60917 mm basic grating for 2,0-printed circuits and back sides
TS EN 60512-11-3 Connectors for electronic devices - Tests and measurements - Part 11-3: Air conditioning tests; Experiment 11c: Wet temperature, steady state
TS EN 60512-11-5 Connectors for electronic devices-Tests and measurements-Part 11-5: Air conditioning tests-Test 11e: Mold
TS EN 61076-4-107 Fasteners for electrical devices - Part 4-107: Quality-assessed printed plate fasteners - Two-piece fasteners for 2,0 mm basic screened shields with soldered and crimped inserts for printed boards with inaccessible insulating displacement and crimped ends Detail feature standard
TS EN 61076-4-108 Fasteners for electrical equipment - Part 4-108: Quality assessed printed plate fasteners - Integrated screening function for 60917 mm transverse package density with 1 mm grating according to IEC 2,5-15 and Detail specification standard for cable-to-plate connectors with 25 mm module bore arrangement
TS EN 61076-4-110 Connectors for electronic equipment - Part 4-110: Printed circuit connectors of evaluated quality; Detail feature for fully armored and locking cable tie with fastening function with a grid of at least 2 mm
TS EN 61076-4-111 Connectors for electrical equipment - Part 4-111: Quality-assessed printed plate connectors Two-part power for printed plates and backplanes with 60917 mm grating and quick-coupling according to IEC 1-2,5 Detail feature standard for connector modules
TS EN 60512-25-2 Connectors for electronic devices-Tests and measurements-Section 25-2: Test 25b: Attenuation (loss of insertion)
TS 11285 EN 60603-4 Connectors-for use on printed plates at frequencies below 3 mhz-Section 4: Two-piece connectors for printed plates with contacts between 1.91 mm (0.075 inches) between centers and in the same spacing
TS 11438 EN 60603-5 Connectors-for use on printed plates at frequencies below 3 mhz-Section 5: 2.54: two-piece connectors with end sockets for double-sided printed sheets spaced mm (0.1 inches)
TS 11525 EN 60603-6 Connectors-for use on printed plates at frequencies below 3 mhz-Section: 6 mm (1.6 inch) contact spaced end connectors for single or double-sided printed plates with nominal thickness 0.063 mm and printed sheet binders
TS 11284 EN 60603-3 Connectors-for use on printed plates at frequencies below 3 mhz-Section 3: Two-piece connectors for printed plates with contacts between 2,54 mm (0,100 inches) between the centers and the same spaced-apart terminations
TS EN 122003 Blank detail specifications and capacity approval with standard specification for standard production for the preparation of customer detail specifications
TS EN 60352-7 Solderless connections - Part 7: Spring clamp connections - General rules, test methods and application guide
TS EN 60512-2-5 Connectors for electronic devices - Tests and measurements - Part 2-5: Electrical continuity and contact resistance tests - Test 2e: Contact disturbance
TS EN 60512-4-1 Connectors for electronic devices - Tests and measurements - Part 4-1: Tensile strength tests - Test 4a: Voltage resistance
TS EN 60068-2-42 Environmental resistance tests - Part 2-42: Tests - Test kc: Sulfur dioxide test for contacts and connections
TS EN 60838-2-2 Lampholders - Miscellaneous - Part- 2-2: Related specifications - Connectors for light emitting diode modules
TS EN 61169-2 Radio-frequency connectors-Section 2: Section specification standard 9,52 type radio-frequency coaxial connectors
TS EN 61076-1 Qualified connectors for direct current (da), low frequency analog and digital high speed data applications - Part 1: General specifications
TS EN 61076-3-114 Connectors for electronic equipment - Product rules - Part 3-114: Rectangular connectors - Use with 60603-way armored or shielded connectors for frequencies up to 7-mhz for industrial environments, including the IEC 600-8 series interface detail specifications for housings - IEC 61076-3-106-related variant 11 - Shaft coupling type
TS EN 60512-15-2 Connectors for electronic devices - Tests and measurements - Part 15-2: Connector tests (mechanical) - Test 15b: Retaining in the housing (axial)
TS EN 60603-7 Connectors for electronic devices - Part 7-1: Detail specification for 8-way, unshielded free and fixed connectors
TS EN 60603-7-41 Connectors for electronic devices - Part 7-41: 8-directional, unshielded free and fixed connectors and detail specification for data transmission at frequencies up to 500 MHz
TS EN 61076-2-107: 2010 Connectors for electronic equipment - Product specifications - Part 2-107: Detailed specifications for fiber optic connected round hybrid m12 connectors with screw switches
TS EN 60603-7-3 Connectors for electronic devices - Part 7-3: 8-path, shielded free and fixed connectors and detail specification for data transmission at frequencies up to 100 mhz
TS EN 60603-7-5 Connectors for electronic devices - Part 7-5: 8-path, shielded free and fixed connectors and detail specification for data transmission at frequencies up to 250 mhz
TS EN 61076-3-001 Connectors for electronic devices - Product specifications - Part 3- 001: Rectangular connectors - Blank detail specifications
TS EN 60512-20-3 Connectors for electronic devices - Tests and measurements - Part 20-3: Fire hazard tests-Test 20c: Flammability, glow wire
TS EN 60512-21-1 Connectors for electronic devices - Tests and measurements - Part 21-1: Rfresistance tests-Test 21a: Rf shunt resistance
TS EN 60512-22-1 Connectors for electronic devices - Tests and measurements - Part 22-1: Capacitance tests-Test 22a: Capacitance
TS EN 60512-22-1 Connectors for electronic devices - Tests and measurements - Part 22-1: Capacitance tests-Test 22a: Capacitance
TS EN 60603-7-7: 2010 Connectors for electronic devices - Part 7-7: 600 Detail specification for 8 path, shielded, free and fixed connectors for data transmission with frequencies up to MHz
TS EN 61076-3-118 Connectors for electronic equipment - Product specifications - Part 3-118: Rectangular connectors - Detailed specification for 4 pole + pe power connector with push-pull connection "
TS EN 60512-8-1 Connectors for electronic devices - Tests and measurements - Part 8-1: Static load tests (fixed connectors) - Test 8a: Static load, transverse
TS EN 60512-17-3 Connectors for electronic devices - Tests and measurements - Part 17-3: Cable clamp tests- Test 17c: Cable clamp resistance to cable pull
TS EN 60512-17-1 Connectors for electronic devices - Tests and measurements - Part 17-1: Cable clamp tests- Test 17a: Cable clamp strength
TS EN 60512-17-4 Connectors for electronic devices - Tests and measurements - Part 17-4: Cable clamp tests- Test 17d: Cable clamp resistance to cable torsion
TS EN 61076-3-115 Connectors for electronic equipment - Product specifications - Section 3-115: Rectangular connectors - For use with shielded or shielded 60603-way armored connectors for frequencies up to 7-mhz for industrial environments, including IEC 600-8 series interfaces Detail specifications related to housings-IEC 61076-3-106 variation associated with 12-Push-Pull type
TS EN 61169-18 Radio frequency connectors - Part 18: Part feature standard - Type ssma's radio-frequency uniaxial connectors
TS EN 61984 Connectors - Safety rules and tests
TS EN 61984 Connectors - Safety requirements and tests (IEC 61984: 2008)
TS EN 62047-8 Semiconductor circuits - Micro electromechanical devices - Part 8: Strip bending test method for measuring the elongation property of thin films
TS EN 60512-8-3 Connectors for electronic devices - Tests and measurements - Part 8-3: Static load tests (fixed connectors) - Test 8c: Robust arm of the mechanism "
TS EN 60512-9-3 Connectors for electronic equipment - Tests and measurements - Part 9-3: Strength tests - Test 9c: Mechanical operation in electrical load (coupling / disconnecting)
TS EN 61076-2 Connectors for electronic devices - Finished goods - Part 2: Part specifications for circular connectors
TS EN 61076-2-106 Connectors for electronic devices - Product specifications - Part 2-106: Circular connectors - Detail specifications for m16x0,75 and ip40 or ip65 / 67 protection grade connectors with screw locking
TS EN 62047-5 Semiconductor circuits - Micro-electromechanical devices - Part 5: RF MEMS switches
TS EN 61076-2-001 Connectors for electronic devices - Product specifications - Part 2-001: Circular connectors; Blank detail feature
TS EN 62047-10 Semiconductor circuits - Microelectromechanical devices - Part 10: Measurement of elongation property of thin films for Mems materials
TS EN 60603-7 / tst A1 Connectors for electronic devices - Part 7: Detail specifications for 8-way, unshielded, free and fixed connectors
tst EN 60512-26-100 Connectors for electrical equipment - Tests and measurements - Part 26-100: Creation of measurements for testers in accordance with IEC 60603-7, test and reference adjustments and measurements -26a to 26g
TS EN 60512-26-100 / tstA1 Connectors for electrical equipment - Tests and measurements - Part 26-100: Creation of measurements for Iec 60603-7, test and reference adjustments and measurements - 26a to 26a
TS EN 60512-7-2 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
TS EN 60512-7-2 Connectors for electronic equipment - Tests and measurements - Part 7-2: Impact tests (free connectors) - Test 7b: Mechanical strength impact
TS EN 60512-9-2 Connectors for electronic equipment - Tests and measurements - Part 9-2: Strength tests - Test 9b: Electrical load and temperature
TS EN 60512-27-100 Connectors for electronic equipment - Tests and measurements - Part 27-100: Signal integrity tests up to 500 mhz on Iec series connectors - 27a to 27g tests
TS EN 60512-1-100 Connectors for electronic devices - Tests and measurements - Part 1-100: General - Applicable standards
TS EN 60352-5 Solderless joints - Part 5: Printed joints - General rules, test methods and practical guide
TS EN 60603-7 / A1 Connectors for electronic devices - Part 7: Detail specifications for 8-way, unshielded, free and fixed connectors
TS EN 60512-99-001 Connectors for electronic equipment - Tests and measurements - Part 99-001: Test program for insertion and removal of connectors under electrical load - Test 99a: Connectors used in remote twisted pair communication cabling
tst EN 61169-2 Radio-frequency connectors-Section 2: Section specification standard Radio-frequency coaxial connectors of type 9,52 (ic 61169-2: 2001)
TS EN 61076-2-101 Connectors for electronic devices - Part 2-101: Circular connectors - Detail specification standard for snap-locking m12 or screw-locking circular m8 connectors for low voltage applications
TS EN 60512-24-1 Connectors for electronic devices - Tests and measurements - Part 24-1: Magnetic interference test-Test 24a: Residual magnetism
TS EN 60512-16-21 Connectors for electronic devices - Tests and measurements - Part 16-21: Mechanical tests on contacts and terminations - Test 16u: Whisker test with external mechanical stress application
TS EN 61076-4-116 Connectors for electronic devices - Product specification - Part 4-116: Printed circuit connectors - Detail specifications for high-speed two-piece connection with integrated protection function
TS EN 60512-28-100 Connectors for electronic equipment - Tests and measurements - Part 28-100: IEC 60603-7 and IEC 61076-3 series with connectors up to 1000 MHz signal integrity tests - 28a and 28g tests
TS EN 61169-26 Radio frequency connectors - Part 26: Part standard for RF coaxial connectors of the TNCA series
TS EN 60512-9-4 Connectors for electronic equipment - Tests and measurements - Part 9-4: Strength tests - Test 9d: Endurance of connection holding system and gaskets (maintenance, aging)
TS EN 60352-2 / A1 Solderless connections - Part 2: Solderless fixed connections - General rules, test methods and application guide
TS EN 60512-12-6 For electronic devices - Electromechanical components - Basic test procedures and measuring methods - Part 12: Soldering tests - Part 6: Test 12f: Sealing against paste and cleaning solvents and solder paste in machine soldering
TS EN 50625-1 Collection, logistics and processing requirements for WEEE - Part 1: General Processing Requirements
TS EN 60512-12-7 Fasteners for electronic equipment - Tests and measurements - Part 12-7: Soldering tests - Test 12g: Solderability - Solder holding stability method
TS EN 61076-2-109 Connectors for electronic equipment - Product rules - Part 2-109: Circular connectors - Detail standard for M12 x 1 screw-locking connectors, for data transmission frequencies up to 500 MHz
TS EN 61076-2-104 Connectors for electronic equipment - Product rules - Part 2-104: Circular connectors - M8 detail standard for screw-locking or spring-locking circular connectors
TS EN 60352-5 / AC Solderless connections - Part 5: Compression connections - General rules, test methods and application guide
TS EN 50625-2-1 Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps
TS EN 50625-1 Collection, logistics and treatment requirements for WEEE - Part 1: General treatment requirements
TS EN 50625-2-1 Collection, logistics and treatment requirements for WEEE - Part 2-1: Treatment requirements for lamps
TS EN 60512-29-100 Connectors for electronic equipment - Tests and measurements - Part 29-100: Signal integrity tests up to 12MHz on M500 type connectors
TS EN 61076-4-116 / A1 Connectors for electronic devices - Product specification - Part 4-116: Printed circuit connectors - Detail specifications for high-speed two-piece connection with integrated protection function
TS EN 60603-7-81 Connectors for electronic equipment - Part 7 -81: Detail standard for 2000 bus, armored, free and fixed connectors for data transmissions with frequencies up to MHz
TS EN 61076-3-110 Connectors for electronic devices - Product specifications - Part 3-110: Detail specifications for free and fixed connectors for frequency data transmission up to 3000 MHz
TS EN 60603-7-82 Fasteners for electronic equipment - Part 7 -81: Detail standard for 2000-way, 8 contact, armored, free and fixed connectors for data transmissions with frequencies up to MHz
TS EN 61076-3-120 Connectors for electronic devices - Product specifications - Section 3-120: Rectangular connectors - Switch-disconnected, reconnected power connectors for rated voltage 250 V dc and rated current 30 A
TS 5289 EN 60603-1 Connectors - used in printed circuit boards at frequencies below 3 mhz - Part 1: General specification - Guidelines and general guidelines for the preparation of a quality approved detail specification standard
TS EN 60603-2 Connectors - intended for use with printed circuit boards at frequencies below 3 mhz - Part 2: Detail specifications of two-piece connectors for 2,54 mm (0,1 in) base grid with common assembly characteristics used in printed circuit boards
TS 5381 EN 60512-1 Connectors for electronic devices (connectors) - Tests and measurements - Part 1: General
Environmental resistance test - Section 60068-2: Tests - Kd test: Hydrogen sulfide test for contacts and connections
TS EN 60118-12 Hearing aids - Part 12: Dimensions of electrical connector systems
TS EN 60130-17 Connectors for frequencies below 3 mhz - Part 17: Detail specifications for the versatile interlocking devices used in rechargable batteries allowing interlocking
TS EN 60130-9: 2011 3 connectors for sub-frequencies - Part 9: Circular connectors for radio and audio equipment
Environmental resistance test - Section 60068-2: Tests - Kd test: Hydrogen sulfide test for contacts and connections
TS EN 60118-12 Hearing aids - Part 12: Dimensions of electrical connector systems
TS EN 60130-17 Connectors for frequencies below 3 mhz - Part 17: Detail specifications for the versatile interlocking devices used in rechargable batteries allowing interlocking
TS EN 60130-9: 2011 3 connectors for sub-frequencies - Part 9: Circular connectors for radio and audio equipment
TS EN 60268-12 Sound system devices - Part 12: Connector applications for broadcasting and similar purposes
TS EN 60512-10-4 Electromechanical components for electronic devices - Basic test procedures and measuring methods - Part 10: Impact (free components), static load (fixed components), endurance and overload tests - Part 4: Test 10b: Electrical overload Loading (binders)
TS EN 60512-1-1 Connectors for electronic devices-Tests and measurements-Part 1-1: General inspection-Test 1a: Visual inspection
TS EN 60512-1-2 Connectors for electronic devices-Tests and measurements-Part 1-2: General inspection-Test 1b-Dimension and mass inspection
TS EN 60512-2-1 Connectors for electronic devices-Tests and measurements-Section 2-1: Electrical continuity and contact resistance tests-Test 2a-Millivolt level method
TS EN 60512-2-3 Connectors for electronic devices-Tests and measurements-Section 2-3: Electrical continuity and contact resistance tests-Test 2c-Contact resistance change
TS EN 60512-2-6 Connectors for electronic devices - Tests and measurements - Part 2-6: Electrical continuity and contact resistance tests - Test 2f: Enclosure (housing) electrical continuity
TS EN 60512-3-1 Connectors for electronic devices - Tests and measurements - Part 3-1: Insulation tests - Test 3a: Insulation resistance
TS EN 60512-4-2 Connectors for electronic devices-Tests and measurements-Section 4-2: Stress-strain tests-Test 4b: Partial discharge
TS EN 60512-4-3 Connectors for electronic devices-Tests and measurements-Section 4-3: Tensile strength tests-Test 4c: Tensile strength of pre-insulated crimp tips
TS EN 60512-5-1 Connectors for electronic devices-Tests and measurements-Section 5-1: Current carrying capacity tests-Test 5a: Temperature rise
TS EN 60512-6-1 Connectors for electronic devices - Tests and measurements - Part 6-1: Dynamic stress tests - Test 6a: Acceleration, steady state
TS EN 60512-11-7 Electromechanical components of electronic devices - Basic test procedures and measuring methods - Part 11: Climate tests - Part 7: Test 11g flowing mixed gas corrosion test
TS EN 60512-16-11 Connectors for electronic devices - Tests and measurements - Part 16-11: Mechanical tests on contacts and terminations - Test 16k: Stripping force, solder-wound connections
TS EN 60512-11-4 Connectors for electronic devices - Tests and measurements - Part 11-4: Air conditioning tests; Experiment 11d: Rapid change of temperature
TS EN 60512-11-6 Connectors for electronic devices - Tests and measurements - Part 11-6: Air conditioning tests; Experiment 11f; Corrosion, salty fog
TS EN 60512-11-9 Connectors for electronic devices - Tests and measurements - Part 11-9: Air conditioning tests; Experiment 11: Dry temperature
TS EN 60512-2-2 Connectors for electronic devices - Tests and measurements - Part 2-2: Electrical continuity and contact resistance tests - Test 2b: Contact resistance - Special test current method
TS EN 60512-15-1 Connectors for electronic devices - Tests and measurements - Part 15-1: Connector tests (mechanical) - Test 15a: Contact holding in case of installation
TS EN 60512-15-3 Connectors for electronic devices - Tests and measurements - Part 15-3: Connector tests (mechanical) - Test 15c: Contact holding in the housing (torsion)
TS EN 60512-15-5 Connectors for electronic devices - Tests and measurements - Part 15-5: Connector tests (mechanical) - Test 15e: Contact holding on insertion, cable bending
TS EN 60512-15-4 Connectors for electronic devices - Tests and measurements - Part 15-4: Connector tests (mechanical) - Test 15d: Contact fitting, release and removal force
TS EN 60512-15-7 Connectors for electronic devices - Tests and measurements - Part 15-7: Connector tests (mechanical) - Test 15g: Strength of protective coated fastenings
TS EN 60512-16-2 Connectors for electronic devices - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted input
TS EN 60512-16-3 Connectors for electronic devices - Tests and measurements - Part 16-3: Mechanical tests on contacts and terminations - Test 16c: Contact-Flexural strength
TS EN 60512-16-4 Connectors for electronic devices - Tests and measurements - Part 16-4: Mechanical tests on contacts and terminations - Test 16d: Tensile strength (compression joints)
TS EN 60512-16-5 Connectors for electronic devices - Tests and measurements - Part 16-5: Mechanical tests on contacts and terminations - Test 16e: Gauge holding force (flexible contacts)
TS EN 60512-16-9 Connectors for electronic devices - Tests and measurements - Part 16-9: Mechanical tests on contacts and terminations - Test 16i: Earthing contact spring holding force
TS EN 60512-16-17 Connectors for electronic devices - Tests and measurements - Part 16-17: Mechanical tests on contacts and terminations - Test 16q: Tensile and compression strength, fixed male ends
TS EN 60512-7-1 Connectors for electronic devices - Tests and measurements - Part 7-1: Tapping tests (free ties) - Test 7a: Free fall (repeated)
TS EN 60512-9-1 Connectors for electronic equipment - Tests and measurements - Part 9-1: Strength tests - Test 9a: Mechanical process
TS EN 60512-9-5 Connectors for electronic equipment - Tests and measurements - Part 9-3: Withstand tests - Test 9e: Current loading, conversion
TS EN 60512-23-7 Connectors for electronic devices - Tests and measurements - Part 23-7: Screening and filter tests - Test 23g: Effective transfer impedance of connectors
TS EN 60512-25-1 Connectors for electronic devices-Tests and measurements-Part 25-1: Test 25a-Line mixing ratio
TS EN 60512-25-3 Connectors for electronic devices-Tests and measurements-Part 25-3: Test 25c-Distortion of rise time
TS EN 60512-25-4 Connectors for electronic devices-Tests and measurements-Part 25-4: Test 25d-Propagation delay
TS EN 60512-25-5 Connectors for electronic devices - Test and measurements - Part 25-5: Test 25e: Return loss
TS EN 60512-25-7 Connectors for electronic devices - Test and measurements - Part 25-7: Test 25g: Impedance, reflection, coefficient and voltage steady-wave ratio
TS EN 60512-23-2: 2010 Electromechanical components of electronic devices - Basic test procedures and measurement methods - Part 23-2: Imaging and filtration tests-Test 23b: Printing characteristics of integral filters
TS EN 60512-5-2 Connectors for electronic devices-Tests and measurements-Section 5-2: Current carrying capacity tests-Test 5b: Current reduction with temperature
TS EN 60512-23-4 Connectors for electronic devices-Tests and measurements-Section 23-4: Screening and filtering tests-Test 23d: Transmission line reflections in time domain
TS EN 60512-11-10 Connectors for electronic devices - Tests and measurements - Part 11-10: Air conditioning tests; Experiment 11j: Cold
TS EN 60512-11-11 Connectors for electronic devices - Tests and measurements section 11-11: Air conditioning tests; Experiment 11k; Low air pressure
TS EN 60512-11-13 Connectors for electronic devices - Tests and measurements - Part 11-13: Air conditioning tests; Experiment 111; Gas-tight solderless, coiled connections
TS EN 60512-12-1 Connectors for electronic equipment - Tests and measurements - Part 12-1: Soldering tests - Test 12a: Solderability, wetting, solder bath method
TS EN 60512-12-2 Connectors for electronic equipment - Tests and measurements - Part 12-2: Soldering tests - Test 12b: Solderability, wetting, soldering iron method
TS EN 60512-12-3 Connectors for electronic equipment - Tests and measurements - Part 12-3: Soldering tests - Test 12c: Solderability, dehumidification
TS EN 60512-12-4 Connectors for electronic equipment - Tests and measurements - Part 12-4: Soldering tests - Test 12d: Resistance to soldering heat, method of solder bath
TS EN 60512-12-5 Connectors for electronic equipment - Tests and measurements - Part 12-5: Soldering tests - Test 12e: Resistance to soldering heat, method of soldering iron
TS EN 60512-13-1 Connectors for electronic equipment - Tests and measurements - Part 13-1: Mechanical working tests - Test 13a: Coupling and disconnecting forces
TS EN 60512-13-2 Connectors for electronic equipment - Tests and measurements - Part 13-2: Mechanical working tests - Test 13b: Insertion and withdrawal forces
TS EN 60512-13-5 Connectors for electronic equipment - Tests and measurements - Part 13-5: Mechanical working tests - Test 13e: Polarization and switching method
TS EN 60512-14-2 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leak
TS EN 60512-14-4 Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14f: Immersion-Waterproof test
TS EN 60512-14-5 Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure
TS EN 60512-14-6 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Sealing between surfaces
TS EN 60512-25-9 Connectors for electrical equipment - Tests and measurements - Part 25-9: Signal integrity tests - Test 25i: Alien diaphone
TS EN 60512-25-6 Connectors for electronic devices - Test and measurements - Part 25-6: Test 25f: Eye pattern and error
TS EN 60512-15-8 Electromechanical components of electronic devices-Basic test procedures and measuring methods-Section 15: General section 15: Mechanical tests applied to contacts and terminals-Part 8: Test 15h: Resistance of contact holding system to the application of the instrument26.11.2001
TS EN 60512-16-13 Connectors for electronic devices - Tests and measurements - Part 16-13: Mechanical tests on contacts and terminations - Test 16m: Unwinding, solder-wound connections
TS EN 60512-16-14 Connectors for electronic devices - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male ends
TS EN 60512-16-6 Connectors for electronic devices - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations
TS EN 60512-16-8 Connectors for electronic devices - Tests and measurements - Part 16-8: Mechanical tests on contacts and terminations - Test 16h: Insulation tightness efficiency (compression joints)
TS EN 60512-15-6 Connectors for electronic devices - Tests and measurements - Part 15-6: Connector tests (mechanical) - Test 15f: Effectiveness of connector coupling elements18.01.2010
TS EN 60512-16-16 Connectors for electronic devices - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male ends
TS EN 60512-16-7 Connectors for electronic devices - Tests and measurements - Part 16-7: Mechanical tests on contacts and terminations - Test 16g: Measurement of contact deformation after compression
TS EN 60512-16-1 Connectors for electronic devices - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Prop damage
TS EN 60512-6-2 Connectors for electronic devices - Tests and measurements - Part 6-2: Dynamic stress tests - Test 6b: Impact
TS EN 60512-6-3 Connectors for electronic devices-Tests and measurements-Part 6-3: Dynamic stress tests-Test 6c: Mechanical impact
TS EN 60512-26-100: 2008 Connectors for electrical equipment - Tests and measurements - Part 26-100: Creation of measurements for binders in accordance with IEC 60603-7, test and reference adjustments and measurements - 26a to 26g
TS EN 60512-11-14 Connectors for electronic equipment - Tests and measurements - Part 11-14: Air conditioning tests - Test 11p: Single gas flowing corrosion test
TS EN 60512-26-100: 2008 / A1: 2011 Connectors for electrical equipment - Tests and measurements - Part 26-100: Creation of measurements for connectors according to Iec 60603-7, test and reference adjustments and measurements from 26 to 26 Experiments up to
TS EN 60512-17-2: 2011 Connectors for electronic devices - Tests and measurements - Part 17-2: Cable clamp tests - Test 17b: Cable clamp resistance to cable rotation "
TS EN 60512-16-18 Connectors for electronic devices - Tests and measurements - Part 16-18: Mechanical tests on contacts and terminations - Test 16r: Bending of contacts, simulation
TS EN 60603-8 Connectors - used in printed circuit boards at frequencies below 3 mhz - Part 8: Two-piece used in 0,63 mm (0,63 inch) basic grid printed circuit boards with male contacts 2,54 mm x 0,1 mm
TS EN 60603-2 / A1 Connectors - intended for use with printed circuit boards at frequencies below 3 mhz - Part 2: Part of the quality assessment of two-piece connectors for 2,54 mm (0,1 in) basic grating with common mounting characteristics used in printed circuit boards Detail specification
TS EN 60603-14 Connectors for frequencies below 3 MHz for use with printed circuit boards - Part 14: Audio, video and audio - Detail specifications of circular connectors for low-frequency audio and video applications such as visual equipment (ic 60603-14: 1998)
TS EN 60603-7-51 Connectors for electronic devices - Part 7-3: 8-path, shielded free and fixed connectors and detail specification for data transmission at frequencies up to 500 mhz
TS EN 60603-7-1: 2011 Connectors for electronic devices - Part 7-1: 8-Detail specification for shielded, free and fixed connectors
TS EN 60603-7-2: 2010 Connectors for electronic devices - Part 7-2: 8-directional, unshielded free and fixed connectors and detail specification for data transmission at frequencies up to 100 mhz
TS EN 60603-7-4: 2010 Connectors for electronic devices - Part 7-4: Detail specification standard for 250 non-armored free and fixed connectors for data transmissions at frequencies up to 8 mhz
TS EN 60603-7 Connectors for electronic devices - Part 7: Detail specifications for 8-way, unshielded, free and fixed connectors
TS EN 61076-1 Connectors for electronic devices - Product specifications - part 1: General specifications
TS EN 61076-3: 2008 Connectors for electronic equipment - Product specifications - Part 3: Rectangular connectors - Part specification
TS EN 61076-2-105 Connectors for electronic devices - Part 2-105: Circular connectors - Detail specifications for m5 connectors with screw locking
TS EN 61076-7-100 Connectors for electronic devices - Product specifications - Part 3-100: Cable output devices -
TS EN 61076-7-001 Connectors for electronic devices - Part 7-001: Cable outlet end accessories - Blank detail specification standard
TS EN 61076-2-103 Connectors for electronic devices - Part 2-103: Detail specification standard for most multi-pole connectors (xlr type)
Connectors also used in TS EN 61076-3-100 - High speed data applications at numerical and analog frequencies - Part 3-100: Quality approved rectangular connectors - Detail feature for - 1.27 mm double row shell-shaped and integral ribbon contacts
TS EN 61076-3-101 Dc, quality evaluated connectors used in low analogue and digital high data applications - Part 3: Rectangular connectors - Part 101: 1,27x2,54 detail specifications for insulated connectors with fixed rectangular contacts and trapezoidal sheaths in mm centerline
TS EN 61076-3-103 Connectors for electronic devices - Part 3-103: Rectangular connectors - Detail specification standard for single-row connectors with fixed ribbon cable contacts in 1,25 mm pitch for high-speed serial data (hssdc)
TS EN 61076-3-104 Connectors for electronic devices - Part 3-104: Rectangular connectors - Detail specification standard for free and fixed 600-way shielded connectors for data transmissions at frequencies up to 8 mhz
TS EN 61076-3-106 Connectors for electronic devices - Product specification - Part 3-16: Rectangular connectors - Protective housing detail specifications for use with 60603-Way armored and non-armored connectors for industrial environment compliant with Iec 7-8 series standards
TS EN 61076-3-112 Connectors for electronic devices - Product specifications - Part 3-112: Rectangular connectors - Detail specifications of four-connected rectangular connectors for high-performance serial bus used for consumer audio / video devices
TS EN 61076-3-116 Connectors for electronic equipment - Product rules - Part 3-16: Rectangular connectors - Use with 60603-way armored or shielded connectors for frequencies up to 7-mhz for industrial environments, including the IEC 600-8 series interface detailed specifications of enclosures
TS EN 61076-3-117 Connectors for electronic equipment - Product rules - Part 3-117: Rectangular connectors - Use with 60603-way armored or shielded connectors for frequencies up to 7-mhz for industrial environments, including the IEC 600-8 series interface detail specifications for housings - Iec 61076-3-106-related variant 14 - Push-Pull coupling 18.01.2010 31.220.10
TS EN 61076-4-001 Evaluated quality connectors for digital high-speed data applications with da and low frequency analogue - Part 4: Part specifications - Printed circuit connectors - Part 001: Blank detail specifications
TS EN 61076-4-102 Evaluated quality connectors for digital high-speed data applications with da and low frequency analogue - Part 4: Part specifications - Printed circuit connectors - Part 102
TS EN 61076-4-104 Connectors used in Dc low frequency analogue and digital high speed data applications - Part 4-104: Printed circuit connectors with evaluated quality - Limited to two-piece modular connector, limited to 0,15 mm multi-grid, 2mm Detail specifications for basic grill
TS EN 61076-4-105 Dc, quality-rated connectors used in low analog and digital high data applications - Part 4: Printed circuit connectors - Part 105: 3 to 8 for use in a wide range of applications involving the audio and communications industry Detail feature for 9mm circular connector
TS EN 61076-4-113 Connectors for electronic devices - Printed circuit connectors - Part 4-113: Detail specification standard for 2,54 in-line 5 section connectors with 2 mm grid for printed circuits and backplanes in data line applications
TS EN 61076-4-114 Connectors for electronic devices - Part 4-114: Printed circuit connectors - Detail specification standard for 1 segmented connector with integrated screening function with 1,5 mm x 2 mm grid
TS EN 61076-4-115 Connectors for electronic devices - Part 4-115: Printed circuit connectors - Backplane connector for infiniband device
TS EN 61169-19: 2011Radio frequency connectors - Part 18: Part feature standard - Type ssmb's radio frequency uniaxial connectors
TS EN 61319-1 Interconnection of satellite receiver devices - part 1: Europe
TS EN 62197-1 Connectors for electronic devices - Quality evaluation specifications - Part 1: General specifications
TS EN 175101-802 Detail features: Two-piece connectors for printed circuits for the large number of 3 mm basic grid contacts on 4 or 2,54 rods
TS EN 175101-809 Detail specification standard - Short version according to defined cecc 75101-801 2,54-section connectors for grating printed circuits of mm 2
TS EN 175201-804 Detail feature: Circular connector with machined double 1.6 mm radius s-round contact
TS EN 175300 Part features: Rectangular connectors for frequencies below 3 mhz
TS EN 175301-803 Detail feature: Rectangular connectors - Flat contacts, 0.8 mm non-removable clamping screw
TS EN 175301-801 Detail specification standard: High-density rectangular connectors with round detachable compression contact tips
TS EN 175500 Part features: Cable outlet accessories for connectors, including quality approval and qualification approval