Our company professionally performs testing, inspection and certification of all standards in the field of pipe testing.
TS EN 727 Plastic pipes and duct systems-Thermoplastic pipes and fittings -Vicat softening temperature (vys) determination
TS EN 637 Plastic pipe systems - Glass fiber reinforced plastic pipes and fittings - Determination of the amount of components - Gravimetric method
TS EN 1054 Plastic pipe systems-Thermoplastic pipe systems used for disposal of waste water-Determination of air tightness of connections
TS EN 1053 Plastic pipe systems - Thermoplastic pipe systems for non-pressure applications Determination of water tightness
TS EN 705 Plastic pipe systems-Glass fiber reinforced thermoset plastic (grp) pipes and fittings-Regression analysis methods and application
TS EN 802 Plastic pipes and ducting systems-Thermoplastic fittings produced by injection molding-Used in pressure pipe systems-Determination of maximum deformation by compression
TS EN 579 Plastic pipe systems - Crosslinked polyethylene (pe-X) pipes - Determination of the degree of crosslinking by solvent extraction
TS EN 744 Plastic pipes and ducting systems-Thermoplastic pipes-External impact resistance test along the perimeter
TS EN 1227 Plastic pipe systems glass fiber reinforced thermoset plastic (grp) pipes - Long term maximum relative ring deformation under wet conditions
TS 8084 ISO 4065 Thermoplastic pipes-Universal wall thickness chart
TS ISO 9854-1 Thermoplastic pipes - Used in the transport of fluids - Determination of pendulum impact strength by Charpy method - Part 1: General test method
TS ISO 9854-2 Thermoplastic pipes - Used for transporting fluids - Determination of pendulum impact strength by Charpy method - Part 2: Test conditions for pipes manufactured from various materials
TS EN 12061 Plastic pipe systems - Test method for determining the impact strength of thermoplastic fittings
TS ISO 4132 Adapters made of polyvinyl chloride (pvc-U) and metal with no plasticizer added - For pressure pipes - Laying lengths and thread sizes - Metric series
TS ISO 13966 Thermoplastic pipes and fittings - Rated ring stiffness
TS ISO 8361-1 Thermoplastic pipes and fittings - Water absorption - Part 1: General test method
TS ISO 8361-2 Thermoplastic pipes and fittings - Water absorption - Part 2: Test conditions for pipes and fittings made of polyvinyl chloride without plasticizer
TS ISO 8361-3 Thermoplastic pipes and fittings - Water absorption - Part 3: Test conditions for pipes and fittings made of acrylonitrile-butadiene-styrene (abs)
TS ISO 4433-3 Thermoplastic pipes - Resistance to chemical liquids - Classification - Part 3: Polyurethane (pvc-U) with high impact resistance (pvc-U) and non-chlorinated poly (vinyl chloride) (pvc-C) pipes
TS ISO 4433-4 Thermoplastic pipes - Resistance to chemical fluids - Classification - Part 4: Poly (vinylidene fluoride) (pvdf) pipes
TS EN 13371 Cryogenic tanks-Couplings for cryogenic service
TS EN ISO 16871 Plastic pipes and duct systems - Plastic pipes and fittings - Direct exposure to natural climatic conditions
TS EN ISO 16871 Plastic pipes and ducting systems - Plastic pipes and fittings - Direct (natural) exposure to climatic conditions
TS EN ISO 2505 Thermoplastic tubes - Change in length - Test method and parameters
TS EN ISO 1167-1 Thermoplastic pipes, fittings and tools-Used for the transport of liquids-Determination of resistance to internal pressure-Part 1: General method
TS EN ISO 15874-1 / tst A1 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 1: General
TS EN ISO 13478 Thermoplastic pipes - Used for transporting fluids - Determination of resistance to rapid crack propagation
TS EN ISO 1167-3 Thermoplastic pipes, fittings and fittings -Used for carrying liquids -Interesting resistance to internal pressure -Preparation of components
TS EN ISO 1167-4 Thermoplastic pipes, fittings and tools-Used for transporting liquids-Determination of resistance to internal pressure-Preparation of tools
tst ISO 12176-4 Plastic pipes and fittings - Hardware for polyethylene systems with fusion connection - Part 4: Conformity coding
TS EN ISO 13477 Thermoplastic pipes - Used for transporting fluids - Determination of resistance to rapid crack propagation (rpc) - Small scale steady state test (s4 test)
TS EN ISO 15877-2 Plastic pipe systems for hot and cold water systems Chlorinated poly (vinyl chloride) (pvc-C) - Part 2: Pipes
TS EN ISO 1452-1 Plastic pipe systems - for drinking and potable water - Used in underground and surface pressure sewage systems - Polyvinyl chloride (PVC-U) without plasticizer - Part 1: General
TS EN 1447 + A1 Plastic pipe systems - Glass fiber reinforced thermoset plastic (grp) pipes - Determination of long term internal compressive strength
TS EN 1555-2 Plastic piping systems - Used for the transport of gas fuels - Polyethylene (pe) - Part 2: Pipes
TS EN ISO 15877-2: 2009 / A1 Plastic piping systems for hot and cold water systems Chlorinated poly (vinyl chloride) (pvc-C) - Part 2: Pipes
TS EN ISO 15877-5 / A1 Plastic pipe systems - For hot and cold water systems - Chlorinated poly (vinyl chloride) (pvc-C) - Part 5: Suitability of the system for its purpose
TS EN ISO 11296-4 Plastic piping systems for the renewal of underground pressure-free drainage and sewage lines - Part 4: Priming with on-site cured pipes
TS 10672-2 EN ISO 15875-2 / tst A1 -Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 2: Pipes
TS 10672-1 EN ISO 15875-1 / tst A1 -Plastic pipe systems - For hot and cold water - Cross-linked polyethylene (pe-X) - Part 1: General
TS EN ISO 1452-5 Plastic pipe systems - Used for drinking and potable water, underground and surface pressure drainage and sewage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 5: suitability of the system
TS EN 12201-1 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 1: General
TS EN 12201-3 + A1 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 3: Fittings
TS EN 12201-5 Plastic pipe systems for potable and utility water, sewage and drainage under pressure - Polyethylene (PE) - Part 5: suitability of the system for its purpose
TSE CEN / TS 1519-2 Plastic pipe systems -Used for disposal of indoor waste water -Pietylene (pe) -Chapter 2: Conformity assessment guide
TSE CEN / TS 1566-2 Plastic pipe systems - Used for the disposal of cold and hot waste water in the building - Chlorinated polyvinyl chloride (pvc-C) - Part 2: Conformity assessment guide
TS EN 1555-2 Plastic pipe systems - For the transport of gas fuels - Polyethylene (PE) - Part 2: Pipes
TS EN 12201-2 + A1 Plastic pipe systems - For pressurized drinking and potable water, drainage and sewage - polyethylene (PE) - Part 2: Pipes
tst 10979 Plastics - Ring or tubular - Determination of tensile strength - Splitting disc method
TS ISO 18553 Test method for evaluating the degree of pigment or carbon black dispersion in polyolefin pipes, pipe fittings and compounds
TS ISO 13956 Plastic pipes and fittings - Determination of adhesion strength - Tear test for polyethylene (pe) tools
TS EN ISO 9080 Determination of long term hydrostatic strength of plastic pipes and duct systems thermoplastic pipe materials by extrapolation method
TS ISO 11414 Plastic pipes and fittings-Polyethylene (pe) pipe / pipe or pipe / joint part test systems with butt welding
TS EN 12007-2 Gas supply systems - Piping - Maximum operating pressure up to 16 bar (included) - Part 2: Special recommendations on function for polyethylene pipelines with maximum operating pressure up to 10 bar (included)
TS EN ISO 10147 Pipe and fittings made of cross-linked polyethylene (PE-X) - Determination of gel content and estimation of the degree of cross-linking
TS EN ISO 11296-7 Plastic piping systems for the repair of underground unpressurized discharge and sewer networks - Part 7: Coating with spiral wound pipes
TS EN ISO 11299-1 Pipe systems for the renewal of underground gas networks Plastic - Part 1: General
TS EN ISO 11299-3: 2013 Pipe systems for renewal of underground gas networks Plastic - Part 3: Liner with narrow-fit pipes
TS EN ISO 15874-1 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 1: General
TS EN ISO 15874-2 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 2: Pipes
TS EN ISO 15874-5 Plastic piping systems for hot and cold water - Polypropylene (pp) - Part 5: System suitability
TS EN ISO 13260 Thermoplastic pipe systems for unpressurized underground drainage and waste water - Simultaneous temperature cycling and external load resistance test method
TSE CEN ISO / TS 21003-7 / A1 Multilayer pipe systems for indoor hot and cold water installations - Part 7: Guidelines for conformity assessment
TS EN ISO 15876-2 Plastic pipe systems -Used in hot and cold water systems-Polybutylene (pb) -Chapter 2: Pipes
TS EN ISO 15876-5 Plastic pipe systems - Used in hot and cold water systems - Polybutylene (pb) - Part 5: suitability of the system for its purpose
TS ISO 161-2 Thermoplastic tubes for the transport of fluids - Nominal outside diameters and nominal pressures part II: Inch series
TS ISO 161-1 Thermoplastic pipes for the transport of fluids - Nominal outside diameters and
TS EN 637 / AC Plastic pipe systems - Glass fiber reinforced plastic pipes and fittings - Determination of the amount of components - Gravimetric method
TS EN 705 / AC Plastic pipe systems-Glass fiber reinforced thermoset plastic (grp) pipes and fittings-Regression analysis methods and application
TS EN 761 Plastic pipe systems - Glass fiber reinforced thermoset plastic pipes (grp) - Determination of creep factor in dry conditions
TS EN 761 / AC Plastic pipe systems - Glass fiber reinforced thermoset plastic pipes (grp) - Determination of creep factor in dry conditions
TS EN 1055 (Formerly no: TS prEN 1055) Plastic pipe systems -Pipe systems for the disposal of domestic wastewater-Determination of resistance to high temperature cycle
TS EN 1120 Plastic pipe systems - Glass fiber reinforced thermoset plastic (grp) pipes and fittings - Determination of chemical resistance of the inner surfaces of the flattened state
TS EN ISO 1167-2 Thermoplastic pipes, fittings and tools-Used for the transport of liquids-Determination of resistance to internal pressure-Preparation of pipe test pieces
TS EN 1227 Plastic pipe systems - Glass fiber reinforced thermoset plastic pipes (GRP) - Determination of maximum relative relative ring deformation under wet conditions
TS EN 1228 Plastic pipe systems - Glass fiber reinforced thermoset plastic (grp) pipes - Determination of initial specific ring stiffness
TS EN 1229 Plastic pipe systems - Glass fiber reinforced thermoset plastic (grp) pipes and fittings - Test method for checking the tightness of the pipe wall under short-term internal pressure
TS EN 1393 Plastic pipe systems-Glass fiber reinforced thermoset plastic (grp) pipes-Determination of initial drawing properties
TS EN 1393 / AC Plastic pipe systems - Glass fiber reinforced thermoset plastic (grp) pipes - Determination of initial length tensile properties
TS EN 1394 Plastic pipe systems - Glass fiber reinforced thermoset plastic (grp) pipes - Determination of initial visible ring tensile strength
TS EN 1411 Plastic pipes and ducting systems-Thermoplastic pipes-Determination of resistance to external impact applied gradually
TS EN ISO 1452-3 Plastic pipe systems - Used in potable and domestic water and underground and surface pressure drainage and sewerage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 3- Fittings
TS EN ISO 1452-4 Plastic pipe systems - Used for potable and potable water and underground and surface pressure drainage and sewage systems - Unplasticized polyvinyl chloride (pvc-U) - Part 4: Valves
tst EN 1796 + A1 Plastic pipe systems - Unsaturated polyester resin (up) based - Glass fiber reinforced thermoplastic (ctp) - Used in pressurized or unpressurized drinking and potable water systems
TS EN 1979 Plastic pipes and sewer systems-Spiral-shaped structural wall thermoplastic pipes-Determination of seam tensile strength
TS ISO 2045 Plastic pipes - Single pipe heads for pressure pipes of non-plasticized polyvinyl chloride (pvc-U) and chlorinated polyvinyl chloride (pvc) with elastic, ring-type connections - Minimum connection depth
TS EN ISO 2505 Thermoplastic tubes - Change in length - Test method and parameters
TS EN ISO 3126 Plastic pipe systems - Plastic components - Determination of dimensions
TS ISO 11922-1 Thermoplastic tubes - Used for transporting fluids - Dimensions and tolerances - Part 1: Metric series
TS ISO 11922-2 Thermoplastic tubes - Used for transporting fluids - Dimensions and tolerances - Part 2: Inch series
TS ISO 12091 Thermoplastic pipes - Profiled - Oven test
TS EN 12099 Plastic pipe systems-Polyethylene pipe materials and elements-Determination of volatile content
TS EN 12106 Plastic pipe systems - Polyethylene (pe) pipes - Strength test to internal pressure after compression
TS EN 12118 Plastic pipe systems - Determination of moisture content in thermoplastics by coulometry method
TS EN 12293 Plastic pipe systems - Thermoplastic pipes and fittings used in hot and cold water systems - Test method for determination of the resistance of the connected tools to temperature conversion
TS EN 12294 Plastic pipe systems - Hot and cold water systems - Tightness test under vacuum
TS EN 12295 Plastic pipe systems - Thermoplastic pipes and fittings used in hot and cold water systems - Pressure cycle resistance test of joints
TS EN 12324-2 Irrigation techniques - Roller systems - Part 2: Properties of polyethylene pipes used in roller systems
TS EN ISO 13479 Polyolefin tubes - Used for transporting liquids - Determination of resistance to crack propagation - Slow crack propagation test on notched pipes (notch test)
TS ISO 13480 Polyethylene pipes - Resistance to slow crack growth - Cone test method
TS EN ISO 13760 Plastic pipes - Used for transporting liquids under pressure - Miner rule - Calculation of total damage
TS EN 14408-3 Plastic piping systems for the renewal of underground gas networks - Part 3: Priming with tight-fitting pipes
TS EN ISO 15877-5 Plastic pipe systems for hot and cold water systems Chlorinated poly (vinyl chloride) (pvc-C) - Part 5: suitability of the system for its purpose
TS EN 16000 Plastic pipe systems - Indoor systems - Mounting and fixing of components in a test device that generates a thermal effect with a single combustion unit